Good jeans

Share
Top right hand side (as worn) of a pair of blue jeans.
single denim

I am really pleased with the job I did on these jeans, so time for a post about them.

These are the third pair of jeans I've made since Aidsy got me the Closet Core jeans making class, fabric and other supplies for my birthday earlier this year. I made two practice pairs from that gift - one of which I wear all the time, the other of which I was wearing all the time until I destroyed them by riding my bike in them. Whoops. The practice pairs were great for getting my head around the process and figuring out the best supplies - especially the hardware.

All three pairs I made following the mid rise, wide-leg variant of Closet Core's Frank pattern. And frankly (heh), I could happily keep making this pattern over and over, especially since the big dacks resurgence.

Making jeans is a lot of fun and I strongly encourage doing it. They're challenging, both in terms of skills and pushing the sewing machine to get through some thick layers. I have happily sewn through many layers of thick denim with my previous $300 machine so one should not be discouraged by their equipment. There is lots of scope for creative customisation. And when they fit well, it's incredibly satisfying.

I also never get sick of telling people, "I made these jeans!" - to which they always reply, "you MADE them??!" Heck yeah.

Now here is a little list of my supplies:

  • The fabric was unlabelled blue denim from Drapers Fabrics in Fitzroy. It's softened denim from South Korea and at a guess is about 9 oz weight (so not very thick - summery). It was $30/m for 1.5 m width, and I bought 2.3 m which was a bit too much in the end.
  • I used topstitching thread leftover from other projects, so I ended up with a colour scheme of purple for the tops of pockets, gold for sides of pockets, and white for everything else. I also did my bar tacks in purple and gold, using general sewing thread. I always seem to buy Gutermann threads.
  • I use hardware kits from Kylie and the Machine. I also use their tool set (I consider it necessary) which includes an awl, anvil, setter tools and a few consumables. Don't fuck around with hardware is my advice, just get this brand.

I made them with a button fly which was easier than I expected it to be. It involved cutting an extra piece for a placket by using the work in progress jeans as a template. The jeans making class stepped me through this as the pattern does not include the placket or instructions.

Installing the hardware involves some very noisy hammering so I'd like to apologise to my neighbours for that. Sorry.

One thing I have not done yet is add rivets. I still might add them to these jeans. As it is I haven't added bar tacks to the corners of my pocket (in the places you'd typically find rivets). I will need to test installing the rivets as I probably need to trim the pins that go in the back of them.

My experience sewing these jeans was a combination of excitement, knowing I was doing a really good job of them, and panic because they seemed on the small side and I wasn't convinced they were going to fit. I decided to hold my nerve knowing I'll already made the pattern twice before.

In the end they fit absolutely perfectly! I am so delighted with them. They're incredibly comfortable too.